Material: Durable aircraft-grade aluminum
Size: 7.1*0.71*0.71 inch (180*18*18mm)
Voltage: DC 5V 2A
Nozzle Diameter: 0.6mm
Printing Temperature: 180-220℃ adjustable
Printing Speed: Low, Mideum, High speed
Printing Model: PLA 1.75mm
Cable length: 1.5m
Package Size: 18.8*15.5*6cm
Package Weight: about 400g
Package included: 1* 3D pen, 1*USB cable, 1* power adapter, 1* 24.6ft（7.5M） random color PLA filament, 1* pen holder
1.Connect the 3d pen to power supply(5V/2A),It enters into standby condition when the LED screen lights. 2If you need to switch to the ABS filament mode please press the “√” button for 3 seconds.The LED screen displays MATEL:ABS mode. 3.Press the “«” button once and load filament refills into the pen. (Please gently push the another end of the filament until it goes through the gear.)Double click the “«” button to start loading automatically. (Make sure that both end of the filament is smooth) 4.Press the “»” button once to start unloading automatically,when the unloading progress is about to finish please pull the filament gently out of the pen.(The unloading progress must be finished in one time.
1. Applicable age: 5 years old and above.
2. Pay attention to the temperature of the nozzle, please do not touch the nozzle during using.
3. Please do not use the nib to touch other hard objects.
4. Please do not use foreign materials to load the hole of filament or the nib.
5. Please do not use other manufacturers’ consumables, so as not to cause incompatibility.
6. This product is not waterproof.
7. Make sure that the filament is completely out of the pen and cut off the power supply after using.
8. Please put the pen in a place where children can not touch after using.
🖋️【Normal Temperature 3D pen】 compatible with Both ABS & PLA Filament – The Aircraft-grade aluminum 3D drawing pen is suitable for both 1.75mm ABS & PLA Filament. PLA Filament is non-toxic and odorless,safer than ABS, and tend to be widely-used filaments.Please do not use with PCL filament.
🖋️【Free and Safer PLA Filament Included】 This 3D Printing Pen comes with free one 7.5 meters PLA filament s for Kids，doodling art craft making，adults，artists，teens ,Girls.Save 10% on extra PLA filament [ASIN:B01MYA09QM] upon purchase this 3D pen,enter code 3WY78DAL at checkout.
🖋️【Adjustable Temperature and Speed】enables you control the temperature and speed when you enjoy drawing in 3D model.Please make sure that the electricity of the power bank is no less than 40% when you connect it to the 3D pen.
🖋️【Package Content】 1*3D printing pen 2. 1*Power adapter（5V/2A） 3.1*USB cable 4.1*Manual 5. 1*24.6ft(7.5m) length PLA filament 6.1*pen holder The heater nozzle of the 3d printing pen can be replaced. Asin:B0722K6Y6B
🖋️【Warranty from the purchase date】30 days return [replace] a purchase,1 year Warranty and whole-life customer service, please contact us through firstname.lastname@example.org if you have any problem with this 3D pen